Moog | MF-104M Moogerfooger Analog Delay
MF-104M
- Discontinued
- Delay
- Microchip (DSP, BBD, Etc.)
- MF-104
- MF-104Z
- MF-104SD
A special “Bucket Brigade” delay chip was employed allowing the effect to remain completely analog. Unfortunately, the supply of these chips was limited and the final MF-104 sold in 2001. Since then there have been two reissues of the Classic MF-104, the MF-104Z and the MF-104SD. In that time, each has been added to a short list of the most sought after analog delays in history.
The MF-104M recreates the sound and vibe of the Classic MF-104. It even uses the same vintage “Bucket Brigade” delay chips found in the original, which provide 800ms of the richest, creamiest, all analog delay on the planet.
A new 6 Waveshape LFO significantly expands the sonic capabilities of this Classic Analog Delay. Use it to create expansive delays that transport you through time, beautifully modulate the delay trails, or create sounds and delays that are simply out of this world.
Spillover Mode has been the most popular modification to the MF-104 and is now included in the MF-104M. Decide on the fly whether delay trails end or continue when you disengage the Delay.
A dedicated Tap Tempo switch lets you quickly tap in your Delay Time or LFO Rate, and the addition of MIDI brings a new world of control and function to the MF-104M. Use it to control and manipulate every function on and under the hood. It’s also a great way to incorporate an analog delay into your studio productions.
Rear panel features include CV/Expression Pedal inputs which provide hands free control and manipulation of Time, Rate, Feedback, Amount, and Mix. Like all Moogerfoogers, you can connect Moog EP2 expression pedals to any of these CV/Expression inputs to control functions, or connect other Moogerfoogers and create new effects.
Additionally, the Feedback Insert allows you to patch in other stomp box or outboard effects onto the delay line for even more creative flexibility.
The MF-104M is available for a limited time only, so grab this piece of Analog history before it’s gone forever-forever-forever-forever!
- Drive: From -7dB to +28dB of input signal gain or attenuation with three-color level LED
- Mix: Crossfader control to set the ratio of wet to dry signal
- Bypass: On/Bypass switch with LED indicator. When the effect is on the Bypass LED is green. When in Spillover mode the Bypass LED is orange. When the effect is off the Bypass LED is red
- Spillover: Press and hold Bypass to engage/disengage delay Spillover Mode
- Time: Control range of 40ms–800ms of analog delay time with LED indicator. The LED is Red when controlled by the Time knob, and Green when controlled by Tap Tempo
- Short/Long Range: Select between a short, bright delay 40ms to 400ms and a long, dark delay 80ms to 800ms
Email Sugaree Licks any additional Promotional Videos
Email Sugaree Licks any additional Settings Videos
Email Sugaree Licks any additions or corrections to Artist(s) Used
Email Sugaree Licks any additions or corrections to Album(s) On
Email Sugaree Licks any additions or corrections to Awards